Product

Tunnel furnace sintering push plate

2017-09-16 14:29:32

Tunnel furnace sintering push plate

Equipment use:
This equipment is mainly used in ceramic base slab slices, high temperature glue, combustion and high temperature ceramic sintering
The main technical parameters:
High temperature period of the highest design temperature: 1400 ℃; The long-term working temperature: 1200 ℃.
2, active furnace size: 19200 * 370 * 300 mm (L * W * H) including pushing plate thickness.
3, push board size: 340 * 340 * 35 mm * L * H (W) (the buyer should bring along their own), a single push plate actual load 27 kg.
4, the temperature control precision: + / - 1 ℃ or less.
5, constant temperature zone temperature uniformity: + / - 5 ℃ or less (WenHuan import test at 1200 ℃ in measurement shall prevail).
6, divided chamber of a stove or furnace: the furnace effective length 19.2 meters, the focal length of 6.4 m, heating length 4.8 meters, constant temperature length 2.4 meters, slow cooling length 1.6 meters, rapid cooling length 4 m.
All the furnace, temperature Settings: once upon a time in the future, set the temperature range of 19, a total of 30 heating temperature control points. One row of focal length is set eight zones, the top middle temperature control; Temperature, constant temperature and slow cooling section are independent temperature control, up and down heating period set six zones; Thermostatic period set three zones; Slow cooling segment set two zones. Every temperature zone length is 800 mm. Rapid cooling section is equipped with two temperature measuring points, which can adjust cooling rate through into the displacement.
8, installed power: 240 kw, about 120 kw thermal insulation operating power.