Product

AB rubber combined row sintering push plate furnace

当前位置:首页 > Product > Other industries
2016-05-20 18:56:29

AB rubber combined row sintering push plate furnace

A, use the equipment

Equipment is used for LiuYanFa base slab production of zirconia ceramics material of high temperature sintering. Substrate glue temperature, sintering, cooling is an organic whole. Equipment for AB modular automatic circulation electric heating push board kiln, glue furnace and sintering furnace reverse arrangement, through the outer loop propulsion system of automatic operation, drive the push plate automatic cycle, complete product low adhesive and high temperature sintering production process.

Second, the structure of the equipment

In order to keep the product line of glue and sintering process time matching, row furnace adopts single channel double push board structure, decorate a double row push board run continuously in the hearth; Sintering furnace adopts single push board structure, single push board inside the chamber of a stove or furnace operation. The combination of operation mode for AB furnace, automatic cycle. , in the whole cycle of the process to anything beyond state of control cycle, and the sound and light alarm, gateway is set alarm device. Set with arch plate, side device infrared correlation alarm system.

Row of glue furnace advance speed range: 450-900 - mm/h, commonly used speed: 646 mm/h, sintering furnace advance speed range: 800-1600 - mm/h, commonly used speed: 1292 mm/h. Equipment running direction is clockwise.

Three main technical parameters, glue furnace

1, the highest temperature: 550 ℃, the long-term working temperature: 400 ℃

2, furnace size: 23500 * 810 * 390 mm (L * W * H) single channel

3, active furnace size: 23500 * 570 * 390 mm (L * W * H) single channel

4, pushing plate size: 270 x 330 x 50 mm * L * H (W) (double)
5, divided chamber of a stove or furnace: the furnace total length is 23500 mm, the heating length 18250 mm, heat preservation period length is 2000 mm, cooling segment length is 3250 mm
Fourth, main technical parameters of sintering furnace

1, the highest temperature: 1650 ℃; The long-term working temperature: 1600 ℃

2, furnace overall size: 23500 * 480 * 390 mm (L * W * H)

3, active furnace size: 23500 * 300 * 300 (L * W * H)

4, pushing plate size: 270 x 330 x 50 mm (W * L * H)

5, divided chamber of a stove or furnace: the furnace effective length is 23500 mm, the heating length 11270 mm, heat preservation period length is 3840 mm, cooling segment length is 8390 mm

Note: according to user requirements design and manufacture