A, the equipment use:
Used for sintering halide calcium phosphate phosphors.
Second, the main technical parameters of equipment:
1. The chamber of a stove or furnace size: 18020 * 880 * 400 mm (W * H, height 400 trough plate to the height of the arch foot).
2. The front size: 800 x 300 mm (W * H).
3. The furnace size: 18020 * 2000 * 2000 mm (L * W * H).
4. The kiln temperature: 1150 ℃ ~ 1250 ℃.
5. The temperature control precision: + / - 1 ℃ (will be subject to the instrument shows).
6. Constant temperature zone section temperature uniformity: + / - 5 ℃ (will be subject to temperature measuring block test).
7. The kiln rated power: 400 kw.
8. Push board size: 300 x 300 x 40 mm (L * W * H).
9. The main propulsion sages single acuity 3000 KGF.
10. Temperature zone number: six points before and after the furnace temperature area, temperature range of the upper and lower temperature control alone, a total of 12 groups of temperature control.
11. The power requirement: ~ 380 v / 220 v + 10% for 50 hz, power supply capacity is greater than 400 kw.
Water: 0.1 ~ 0.3 MPa; Water flow: 10 m3 / h.
12. The efficient operation of equipment speed: 1500 ~ 4500 mm/h, commonly used speed is 3000 mm/h.
13. Work level: 1000 mm.
14. The equipment surface temperature rise: less than 45 ℃.
Three, furnace body structure:
1. The lining side walls by mullite poly light standard brick materials wet build by laying bricks or stones and thermal insulation layer with light fiber material.
2. The preheating glue area set adjustable vent.
3. The furnace side set portable hangs Taiwan (handle), top cover, beautiful appearance.
4. In order to reduce the outlet temperature of the products (export temperature about 90 ℃), the cooling water jacket, set in cool area is equipped with water overtemperature and overpressure, undervoltage, or water alarm device.
Part four, mechanical motion description:
1. The propulsion adopts mechanical propulsion method, reasonable structure, easy maintenance. Mechanical part mainly includes the main, feeding, export blanking, back entrance, exports from cutting, etc.
2. The main propulsion speed is 1500 ~ 4500 mm/h continuous adjustable, fast forward, slow, slow retreat, retreat quickly, manual into the car and the car, and other functions, main including motor, inverter, cycloidal pinwheel reducer, intermediate shaft, screw, guide bar, electromagnetic clutch, the car motor, etc.
3. The movement of the whole system adopts Japanese omron PLC programmable controller control, set up a simulation display, display the running state.
Five, the electrical parts:
1. The temperature control instrument USES imported Japanese island electric intelligent digital display temperature control instrument, with manual or automatic digital PID temperature control function, also has the ultra gentle accidentally broken alarm, temperature compensation, clipping, arbitrary set thermocouple indexing number password, and other functions, can be displayed on the touch screen at the same time the real-time temperature of different temperature zones.
2. The main propulsion system with functions of overload alarm and alarm arch board. Circulatory system is equipped with a single stroke timeout timeout alarm, single cycle.
Note: according to user requirements design and manufacture.